Linksys extenders can be seen converting internet dead zones into fun zones in numerous houses. After completing the Linksys extender setup, a person can enjoy WiFi connection on his client devices via the SSID. But, problems can arise if the Linksys extender does not broadcast SSID. Is your Linksys extender also not broadcasting SSID? If yes, take a walk through this post. You can take the help of the information given here if you have done Linksys Velop setup in your house. The tips mentioned here are equally applicable.
Basic Fixes: Linksys Extender Not Broadcasting SSID
- Restart the Extender: The most basic fix that has worked in favor of multiple Linksys extender users is a restart. Restarting the WiFi range extender will help it to get rid of networking errors. FYI, networking glitches are capable of making your extender non-performing. To restart your WiFi extender, you should unplug it from its wall socket first and then wait for 20 minutes. Lastly, plug it back in again and refresh the network list of your client device. Is your Linksys extender broadcasting the SSID now? If not, then move to the next tactic.
- Get Closer to Extender: Sometimes, when the user is using his wireless client devices out of the range of the signals emitted by the range extender, he/she is not able to see the SSID on the network list. Perhaps, you are also in the same situation. To turn the table in your favor, you should bring your WiFi devices closer to your range extender. If devices cannot be relocated, then at least try changing the location of your range extender. But, be very certain that you are not placing the extender in a corner or near a thick concrete wall.
So, these were some basic fixes that you should definitely try before giving a shot at the advanced techniques mentioned below. You can also reboot the router to address the issue. However, if you do so, make sure that you also restart the extender. The first turn should be of the router and then the extender must be restarted.
Advanced Fixes: Linksys Extender Not Broadcasting SSID
- Update the Firmware: Chances are that your Linksys range extender is not running on an upgraded firmware version. Know that making the extender run on an outdated firmware version can invite major issues to your table. If you do not want it to happen, you should upgrade the extender’s firmware right away. Simply, access extender.linksys.com on a computer hardwired to your Linksys WiFi extender and install the latest firmware version. Just in case, you choose to upload the firmware file manually, be very sure that you upload the correct firmware file.
- Ping the Router: If the extender is still not able to broadcast the SSID, then there is a possibility that the extender is not getting internet from the router due to which the problem has arisen. Thus, you are suggested to ping the main router. To do that, hardwire your PC to the main router and open command prompt. After that, type the IP address of the router followed by the Ping command, and press Enter. If you get replies, the internet is working fine. Otherwise, you should get in touch with your Internet Service Provider to get the issue fixed.
Note: There may be a fault with the Ethernet cable connecting your Linksys extender and the main router. Thus, you should get it replaced with a new one in case the problem is not from the end of your Internet Service Provider.
- Enable SSID Broadcast: Well, some Linksys extenders allow you to enable the SSID broadcast simply by completing the Linksys extender login process. On the other hand, you will have to access the web-based management panel of the main router to enable the SSID broadcast. This usually happens when the extender runs on the wireless settings as same as the main router. In that case, the user should enable the router’s SSID broadcast.
The Concluding Thought
We are now wrapping up the post that revealed what to do if the Linksys extender is not broadcasting SSID. It is anticipated that after trying your hands on the basic and advanced techniques given above, you will be able to get the issue fixed. Otherwise, you will have to reset the extender and set it up once again.
